My Great Lakes 2T-1A-2 Rebuild Diary 2007. 02/03-October-2007. Made & fitted HS mounting cover,
and last rivet tape. Also fitted elevator leading edge tape.
The bolts to mount the H/S are under the fabric, so a cover needs
to be fitted.
|
|
This part is guled to the fabric. The inside of the fabric is cut
out after painting. I re-made this part as the original had multiple
holes from a previous recover where the cover had been refitted.
Fabric over the top.
|
|
Applying leading edge tape to the elevator - my last tape for this part.
This turned out to be quite difficult - I end up calling fellow builder
David (thanks David) for advise as it would not stay in place as you
can see from this picture.
|
|
Once the inspection cover had dried I put the inner tape on.
|
|
Copyright © 2007 GreatLakes2T .co.uk All rights reserved. All pictures are property of GreatLakes2T (unless noted) please do not reproduce. For more information contact webmaster [at] greatlakes2t .co.uk This site is NOT the official Great Lakes Inc site. The contents of this site are the opinion of the author, not PFA, FAA or CAA. Please check all information is correct before you act upon it. |